SINGLE LEVER
LAVATORY FAUCET
Installation
Instructions
M968712 REV. 1.2
2086
Certified to comply with ANSI A112.18.1
TENDENCE
1
For 3-hole (4" centers) installation,
apply Putty to underside of Escutcheon
(4)
and place over holes in lavatory sink with tab
towards back.
FAUCET INSTALLATION
Feed faucet tubes through Rubber Ring
(2)
and through hole in Escutcheon
(4)
or mounting
surface. Make sure Rubber Ring
(2)
is seated in
groove in base of Faucet
(1)
. Escutcheon
(4)
is optional on single hole lavatories.
From below, push Mounting Gasket
(5)
and
Mounting Washer
(6)
over Stud
(3)
and secure
with Nut
(7)
, pushing Faucet
(1)
to back of sink,
so Stud
(3)
rests against sink hole. Before final
tightening, adjust Faucet
(1)
and Escutcheon
(4)
so that they are centered.
Carefully bend and/or cut supply tubes and
connect left tube to HOT water and right
tube to COLD water supply using appropriate
connectors.
Plumbers' Putty or Caulking
Adjustable Wrench
3/32" Hex Key
Channel Locks
TOOLS REQUIRED
LAVATORY
PUTTY
1
2
3
4
5
7
6
Turn off water at
main supply.
CAUTION
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
