1
740170-100 Rev. B
™
P r o d u c t n a m e s l i s t e d h e r e i n a r e t r a d e m a r k s o f A m e r i c a n S t a n d a r d I n c .
© A m e r i c a n S t a n d a r d I n c . 2 0 0 7
Recommended Tools & Materials
INSTALLATION INSTRUCTIONS
5-1/2' Cast Iron Bath
CAUTION: RISK OF PERSONAL INJURY. CAST IRON BATHS ARE EXTREMELY HEAVY.
THIS IS A TWO PERSON INSTALLATION.
!
Model 2696.102
Model 2696.202
Thank you for selecting American Standard - the benchmark of fine quality for over 100 years. To ensure this product is installed properly, please read
these instructions carefully before you begin. (Certain installations may require professional help.) Also be sure your installation conforms to local codes.
• Rule
• Level
• Square
• Pliers
• Pipe Wrench
• Wood Working Tools
• Plumbers Putty
• Silicone Sealant
• Metal Shims
• Wall Coverings, As Needed
REMOVE THE OLD BATH (IF APPLICABLE)
Floor Protective
Material
Old Bath
Fig. 1
Fig. 2
Disconnect the drain at the trap. Remove any
old wall material.
Slip boards under the old
bath feet to protect the floor,
and slide the
old bath out of the recess as illustrated.
PREPARE SUBFLOOR
Check the flooring under the bath area, and repair it if necessary. Make sure the subfloor is level.
DETERMINE FRAMING ROUGH-IN
Construct a recess using 2 x 4 construction designed for your particular installation.
Allow for thickness of finished wall material.
LEFT HAND TUB ILLUSTRATED
RIGHT HAND TUB IS REVERSED
SUPPORT
FEET
ROUGH
FLOOR
FINISHED
WALL
FINISHED
WALL
406mm
16"
64mm
2-1/2"
DIA.
18mm
11/16"
76mm
3"
229 x 305mm
9" X 12" HOLE
IN SUB FLOOR
FOR BELOW
FLOOR ROUGH
813mm
32"
1682mm
66-1/4"
FINISHED
WALL
384mm
15-1/8"
FINISHED
WALL
73mm
2-7/8"
FINISHED
WALL
194mm
7-5/8"
102mm
4"
STD. 1-1/2
DRAIN OUTLET
32mm
1-1/4"
-1-
AME
RICA
N
STA
NDA
RD
AME
RICA
N
STA
NDA
RD
