C21
© 2008 AS America Inc.
SEVA
SINGLE CONTROL LAVATORY FAUCET
MODEL NUMBER:
1480.101 Seva Single Control Centerset
Metal Speed Connect
®
Pop-up drain. Escutcheon plate.
1480.100 Seva Single Control Centerset
Less pop-up drain. Less pop-up hole. Escutcheon plate.
PRODUCT FEATURES:
Brass Construction:
Durable. Easy to clean. Ideal for
prolonged contact with water.
Ceramic Disc Valve Cartridge:
Assures a lifetime of
drip-free performance.
Adjustable Hot Limit Safety Stop:
Limits the amount of
hot water allowed to mix with cold. Reduces the risk of
accidental scalding.
Low Lead:
Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Exclusive Speed Connect
®
Metal Drain:
• Fewer parts. Installs in less time.
• No adjustments required - seals the first time, every time.
• Flexible stainless steel cable - installs effortlessly in tight spaces.
Choice of Finishes:
Choice of Polished Chrome or Satin
Nickel (PVD).
SUGGESTED SPECIFICATION:
Single control lavatory fitting shall feature a cast brass body and escutcheon with all metal handle. Shall also feature
washerless ceramic disc valve cartridge with integral hot limit safety stop. Shall also feature a metal drain body with stainless
steel cable actuation.
Fitting shall be American Standard Model # 1480.___.___.
1480.101
Product
Number
Description
Seva Single Control Centerset. Metal Speed Connect
®
Pop-up drain.
1480.100
Seva Single Control Centerset. Less pop-up drain. Less pop-up hole.
Finish Options
Polished
Chrome
002
PVD
Satin
Nickel
295
GENERAL DESCRIPTION:
Cast brass body and brass escutcheon with all metal handle.
Washerless 47mm ceramic disc valve cartridge with integral
hot limit safety stop. Braided flexible supply hoses with 3/8"
compression connectors. 20 inch (500mm) long flexible
stainless steel drain cable is pre-assembled to faucet body.
Metal Speed Connect
®
drain body with 1-1/4 inch (32mm) tail
piece.
1.5 gpm/5.7L/min. maximum flow rate.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ANSI A117.1
ASME A112.18.1
NSF 61/Section 9
Meets the American Disabilities Act Guidelines
and
ANSI A117.1 Requirements for the
physically challenged.
1480.101 Shown
127mm
(5)
114mm
(4-1/2)
450mm
(17-3/4)
29mm
(1-1/8) MAX.
50mm
(2)
54mm
(2-1/8)
N/A =
NOT AVAILABLE
N/A
WALL
25mm
(1)
MIN.
32mm OD
(1-1/4 OD)
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
100
80
60
40
20
