K57
Revised 2/08
© 2008 AS America Inc.
To Be Specified:
❏
Color:
❏
White
❏
Bone
❏
Silver
❏
Linen
❏
Black
❏
Seat: #5325.010 Elongated Champion
®
Slow Close
solid plastic seat and cover with easy lift off feature
❏
Seat: #5284.016 Elongated EverClean
®
solid plastic
seat and cover
❏
Seat: #5321.110 EverClean
®
Elongated Seat with
Slow Close Snap-Off Hinges
❏
Supply with stop:
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
254MM (10") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT:
Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
CADET
®
3 RIGHT HEIGHT™ 10"
ROuGH-IN ELONGATED
TOILET
VITREOuS CHINA
CADET
®
3 RIGHT HEIGHT™ 10" ROuGH-IN
ELONGATED TOILET
❑
2386.010
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• EverClean
®
surface inhibits the growth of
stain- and odor-causing bacteria, mold,
and mildew on the surface
• Features the
Cadet
®
3 Flushing System
• 16-1/2" rim height for accessible application
• Elongated siphon action jetted bowl
• Fully-glazed 2-1/8" trapway with 2" ball pass
• Generous 9" x 8" water surface area
• Close-coupled tank with flat tank cover for
superior storage
• Oversized 3" flush valve with chemical
resistant flapper
• Chrome trip lever
• Speed Connect
®
tank-to-bowl coupling system
• Sanitary dam on bowl with four point
tank stabilization
• 2 color-matched bolt caps
• 100% factory flush tested
• 5 year warranty
❑
3016.016
Right Height™ Elongated Bowl
❑
4019.016
Tank
Nominal Dimensions:
724 x 432 x 768mm
(28-1/2" x 17" x 30-1/4")
Fixture only, seat and supply by others
Alternative Tank Configurations Available:
❑
4019.600
Tank complete with tank cover
locking device
❑
4019.800
Tank complete with trip lever
on right side
❑
4019.900
Tank complete with tank cover
locking device and trip lever on right side
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
• Los Angeles Department of Water and Power
Supplementary Purchase Specification for
Non-Adjustability
SEE REVERSE FOR ADDITIONAL ROUGHING-IN
DIMENSIONS
