J10
© 2008 AS America Inc.
REPERTOIRE™
PEDESTAL SINK
VITREOUS CHINA
REPERTOIRE™ PEDESTAL SINK
• Traditional-styled basin with backsplash and
matching pedestal
• Made from vitreous china
• Rear overflow
• Supplied with mounting kit
• Faucet ledge (faucet not included)
❏
0240.800 Faucet holes on 8" (203mm) centers
(Illustrated)
❏
0240.400 Faucet holes on 4" (102mm) centers
❏
0240.100 Center hole only
Nominal Dimensions:
610 x 559 x 864mm
(24" x 20" x 34")
Separate Components:
❏
0240.008 Pedestal top-8" (203mm) centers
❏
0240.004 Pedestal top-4" (102mm) centers
❏
0240.001 Pedestal top-center hole only
❏
733500-400 Pedestal only
Bowl sizes:
533mm (21") wide
305mm (12") front to back
152mm (6") deep
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
SUGGESTED.
▼
PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■
SUITABLE FOR REINFORCEMENT ONLY. ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
203mm
(8)
FINISHED WALL
OR SPLASHBACK
610mm
(24)
508mm
(20)
PEDESTAL ANCHORING
SCREW HOLES 5/16 DIA.
216mm
(8-1/2)
76mm
(3)
521mm
(20-1/2)
FINISHED FLOOR
203mm
(8)
1-1/4 O.D
TAILPIECE
1-1/4 O.D.
WASTE
SUPPLIES
AS REQ'D 178mm
(7)
864mm
(34)
603mm
(23-3/4)
197mm
(7-3/4)
527mm
(20-3/4)
*
*
241mm
(9-1/2)
19mm (3/4) DIA. HOLES
FOR ANCHOR BOLTS
210mm
(8-1/4)
76mm
(3)
DRAIN
CHASE
OPEN
TO
FLOOR
To Be Specified:
❏
Color:
❏
White
❏
Bone
❏
Linen
❏
Silver
❏
Fawn Beige
❏
Black
❏
Faucet*:
❏
Faucet Finish:
❏
Supplies:
❏
1-1/4" Trap:
* See faucet section for additional models available
Revised 2/08
