Certified to comply with ANSI A112.18.1
MIRROR/MEDICINE CABINET
6771
REQUIRED WALL OPENING
Ideally the MIRROR/MEDICINE CABINET can be installed between two wall studs on 16" centers. 2x4 reinforcement on either side are
recommended. The required opening in the wall is 14-3/8" in width by 22" from top to bottom. If wall studs are not in desired location
framing the rough opening will be required. See Illustrations below for rough opening and suggested framing.
Before installing the medicine cabinet with mirror the dry wall and any finished wall should be completed.
Determine the height and location and draw center lines to layout the wall opening.
Regular Screwdriver
Recommended Tools
Level
Tape
Drill
10'
Tape Measure
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
Installation
Instructions
by
C O L L E C T I O N
™
“
”
T H E
14-3/8"
16"
2"
29"
16"
2x4 WALL STUD
16" ON CENTER
2x4 WALL STUDS
16" ON CENTER
SUGGESTED FRAMING
FOR ROUGH OPENING
DRY WALL AND
FINISHED WALL
INTERIOR DEPTH
4-1/8" MINIMUM
4" CABINET
DEPTH
2x4 SIDE
REINFORCEMENT
2x4 SIDE
REINFORCEMENT
2x4 TOP
SUPPORT
1/2" DRY WALL
FINISHED WALL
14-3/8"
ROUGH OPENING
OUTSIDE DIMENSIONS OF CABINET
ARE 14" X 21-3/4"
22"
A
"A - A"
A
2x4 BOTTOM
SUPPORT
Caution; Before cutting into any existing wall check that there is no interference with piping or electrical wiring.
