L55
© 2008 AS America Inc.
HERITAGE
TWO-HANDLE TOP-MOUNT KITCHEN FAUCET
WITH BRASS GOOSENECK SPOUT
GENERAL DESCRIPTION:
Durable cast brass construction. Amarilis 1/4 turn
washerless ceramic disc valve cartridges - reversible for use
with either lever or round handles. One-half inch male inlet
shanks with brass coupling nuts. Brass gooseneck swivel
spout. Brass escutcheon plate (escutcheon size 10"L x
2-1/8"W). 2.2gpm/8.3L/min. maximum flow rate.
PRODUCT FEATURES:
Brass Construction:
Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridges:
Assures a lifetime of
drip-free performance.
Low Lead:
Meets NSF Standard 61/Section 9 & Prop 65
lead requirements.
Wide Selection of Handle Styles:
Full range of
interchangeable handle styles.
6274.000 Shown
MODEL NUMBER:
6274.000 Top-Mount Kitchen Faucet
Gooseneck swivel spout. Color-matched side spray.
Less handles.
6275.000 Top-Mount Kitchen Faucet
Gooseneck swivel spout. Less spray. Less handles
.
Handles must be ordered separately.
SUGGESTED SPECIFICATION:
Two handle top-mount kitchen faucet shall feature cast brass construction with all brass inlet shanks and coupling nuts.
Shall also feature 1/4 turn washerless ceramic disc valve cartridges that are reversible for use with round or lever handles.
Fitting shall be American Standard Model #627_.000.___ and handle kit # 0000.___.___.
To order
Less Handles - Specify: 4 digit style number followed by three zeros and 3 digit finish number.
Example 6274.000.002 = Kitchen faucet with hand spray in Polished Chrome finish.
6274.000
Product
Number
Description
Kitchen faucet. Gooseneck swing spout. Color-matched side spray. Less handles.
Finish
6275.000
Kitchen faucet. Gooseneck swing spout. Less handspray. Less handles.
Polished
Chrome
002
Handles must be ordered separately.
203mm
(8)
35mm to 38mm
(1-3/8 to 1-1/2)
DIA. MOUNTING
HOLE (4 PLACES)
FOR GROUND JOINT
OR 1-1/2" O.D. SLIP
CONNECTION
25mm
(1)MAX.
254mm
(10)
229mm
(9)
159mm
(6-1/4)
311mm
(12-1/4)
21mm
(13/16)
Meets the American Disabilities Act Guidelines
and
ANSI A117.1 Requirements for the
physically challenged.
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
2.5
3.0
100
80
60
40
20
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9
Wrist
Blade
172H
172V
Lever
142H
142V
The above fittings will accept the following Amarilis-Series handles.
25mm
(1)
SPRAY FOR
4 HOLE SINK
121mm
(4-3/4)
51mm
(2)
51mm
(2)MAX.
