H44
© 2008 AS America Inc.
HERITAGE™ 6'
WHIRLPOOL AND BATHING POOL
HIGH GLOSS
Revised 2/08
NOTES:
BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND, OR PENINSULA TYPE INSTALLATION. SUMP
OF BATH IS SUPPORTED BY INTEGRAL FEET. NO ADDITIONAL SUPPORT REQUIRED. ENCLOSING MATERIAL BY OTHERS.
■
REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.
▲
CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY. OPTIONAL GRAB BAR KIT AVAILABLE
AND MUST BE ORDERED SEPARATELY.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.
●
IF INSTALLING A DECK-MOUNTED FITTING, BEFORE DRILLING ANY HOLES: CHECK FOR INTERFERENCE WITH CIRCULATING
SYSTEM PIPING, DRAIN OVERFLOW, AND APRON INSTALLATION. MOUNTING HOLES DRILLED BY INSTALLER.
SUPPLY PIPING NOT INCLUDED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1.
These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided pages.
908mm
(35-3/4)
457mm
(18)
279mm
(11)
INTEGRAL
FITTING DECK
ON/OFF
SWITCH
1829mm
(72)
PUMP
140mm
(5-1/2)
C/L OF
DRAIN
OVERFLOW
OUTLINE OF
CUTOUT
229 x 330mm
(9 X 13)
FLOOR
CUTOUT
PROVIDE ACCESS
TO PUMP FOR SERVICE
ON ALL INSTALLATIONS
LEVELING STRINGER
(NOT FOR SUPPORT)
1-1/2 N.P.T.M. THREADS
51mm
(2)
108mm
(4-1/4)
546mm
(21-1/2)
495mm
(19-1/2)
ROUGH
FLOOR
INTEGRAL
FEET
SUPPORT
1-1/2 O.D.TAILPIECE
51mm
(2)
108mm
(4-1/4)
SAFE-T-HEATER
REMOVABLE
BLANK
C/L OF
OVERFLOW
GENERAL SPECIFICATIONS FOR 2806 WHIRLPOOL
72 x 35-3/4 x 21-1/2 In. (1829 x 908 x 546mm)
135 Lbs. (61 Kg.)
744 Lbs. (338 Kg.)
73 Gal. (276 L)
44 Gal. (167 L)
45 x 24 In. (1143 x 610mm)
60 x 30 In. (1524 x 762 mm)
15 In. (381mm)
41 Lbs./Sq.Ft. (198 Kgs./Sq.m)
25.6
49.4
2.1 HP, 15.6 AMPS ,120V.
SYSTEM II PUMP
WHIRLPOOL ELECTRICAL SPECIFICATIONS
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
WHIRLPOOL MIN. OPERATING VOL.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
908mm
(35-3/4)
457mm
(18)
279mm
(11)
INTEGRAL
FITTING DECK
1829mm
(72)
140mm
(5-1/2)
C/L OF
DRAIN
OVERFLOW
OUTLINE OF
CUTOUT
229 x 330mm
(9 X 13)
FLOOR
CUTOUT
LEVELING STRINGER
(NOT FOR SUPPORT)
1-1/2 N.P.T.M. THREADS
51mm
(2)
108mm
(4-1/4)
546mm
(21-1/2)
495mm
(19-1/2)
ROUGH
FLOOR
INTEGRAL
FEET
SUPPORT
1-1/2 O.D.TAILPIECE
51mm
(2)
108mm
(4-1/4)
C/L OF
OVERFLOW
GENERAL SPECIFICATIONS FOR 2806 BATHING POOL
72 x 35-3/4 x 21-1/2 In. (1829 x 908 x 546mm)
120 Lbs. (52 Kg.)
729 Lbs. (331 Kg.)
73 Gal. (276 L)
45 x 24 In. (1143 x 610mm)
60 x 30 In. (1524 x 762 mm)
15 In. (381mm)
41 Lbs./Sq.Ft. (198 Kgs./Sq.m)
25.6
49.4
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
PTS.
CUBE (FT
3
)
