L37
© 2008 AS America Inc.
HERITAGE
TWO-HANDLE CENTERSET LAVATORY FAUCET
WITH CONVENTIONAL SPOUT & FACTORY INSTALLED HANDLES
GENERAL DESCRIPTION:
Durable cast brass construction. Amarilis 1/4 turn washerless
ceramic disc valve cartridges. One-half inch male inlet shanks
with brass coupling nuts and shank nuts. All brass drain
bodies with 1-1/4" (32mm) tailpieces. 1.5 gpm/5.7L/min.
maximum flow rate.
PRODUCT FEATURES:
Pressure Compensating Aerator:
Provides a constant
water flow of 1.5 gpm throughout the pressure range.
Solid Brass Construction:
Durable - Excellent in high use
applications. Ideal for prolonged contact with water.
Ceramic Disc Valve Cartridges:
Assures a lifetime of
drip-free performance.
Low Lead:
Meets NSF Standard 61/Section 9 & Prop 65 lead
requirements.
Factory Installed Handles:
Simplifies installation.
MODEL NUMBER:
5401.142H Centerset Lavatory Faucet
1.5 gpm pressure compensating aerator.
Metal Lever Handles. Metal pop-up drain.
5401.172H Centerset Lavatory Faucet
1.5 gpm pressure compensating aerator.
Brass Wrist Blade Handles. Metal pop-up drain.
SUGGESTED SPECIFICATION:
4" centerset lavatory faucet shall be cast brass construction with all brass shank nuts and coupling nuts. Shall feature
water-conserving 1.5 gpm/5.7L/min. pressure compensating aerator. Shall also feature 1/4 turn washerless ceramic disc
valve cartridges. Fitting shall be American Standard Model # 5401.____.002 .
Product
Number
Description
Finish
Polished
Chrome
002
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
CSA B 125
NSF 61/Section 9
5401.142H
5401.172H
Centerset lavatory faucet. 1.5 gpm/5.7L/min pressure compensating aerator.
Metal Lever Handles. Metal pop-up drain.
Centerset lavatory faucet. 1.5 gpm/5.7L/min pressure compensating aerator.
Brass Wrist Blade Handles. Metal pop-up drain.
Meets the American Disabilities Act Guidelines
and
ANSI A117.1 Requirements for the
physically challenged.
Shown without handles.
Faucet comes complete with factory installed handles.
56mm
(2-3/16)
76mm
(3)
90mm
(3-9/16)
137mm
(5-3/8)
44mm
(1-3/4)
22mm
(7/8) DIA.
FOR GROUND JOINT
OR 1/2" O.D. SLIP
CONNECTION
51mm
(2)
35mm
(1-3/8) MAX.
32mm
(1-1/4)DIA.
MOUNTING
HOLES
102mm
(4)
Other Aerators Available:
Part Suffix
V15
L15
LV15
V05
Description
1.5 gpm Pressure Compensating Vandal-Resistant Aerator
1.5 gpm Pressure Compensating Laminar Flow
1.5 gpm Pressure Compensating Vandal-Resistant Laminar Flow Outlet
0.5 gpm Pressure Compensating Vandal-Resistant Spray
FLOW RATE*
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
*Flow rates shown are for mixed hot and cold.
0.0
0.5
1.0
1.5
2.0
100
80
60
40
20
