F77
© 2008 AS America Inc.
GREEN TEA™
IN-WALL DIVERTER VALVES
Two-Way In-Wall Diverter. Less Handle.
CODES AND STANDARDS
These products meet or exceed the following
codes and standards:
ASME A112.18.1
R420
Three-Way In-Wall Diverter. Less Handle.
R430
FLOW RATE - R420
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
0
2
4
6
8
10
12
14
16
Tub Port
Port A
80
70
60
50
40
30
20
GENERAL DESCRIPTION:
In-Wall Diverters: Rotational control alternates water flow
between two (R420) or three (R430) different shower outlets
(i.e. showerhead, handspray, body side spray or tub spout).
Forged brass valve body. Mixed water inlet and two (R420) or
three (R430) outlets are marked on back of valve body. 1/2"
NPT connections on mixed water inlet and two (R420) or three
(R430) outlets. Stamped brass escutcheon. Tub port with
increased water flow (see chart).
NOTE:
Cannot be used as a shut-off valve.
PRODUCT FEATURES:
Solid Brass Construction:
Durable, ideal material for
prolonged contact with water.
Removable Plaster Guard:
Permits checking of valve
installation prior to installing trim parts.
Choice of Finishes:
Wide range of durable finishes.
SUGGESTED SPECIFICATION
Two (three) way diverter shall feature a forged brass body with 1/2" NPT mixed water inlet and outlets. Fitting shall be
American Standard Model # T010.430.___ (Diverter Valve Trim) and R4_0. (Rough Valve Body).
FLOW RATE - R430
GALLONS PER MINUTE
I N L E T P R E S S U R E ( P S I )
0
2
4
6
8
10
12
14
16
Tub Port
Port A/B
80
70
60
50
40
30
20
** ROUGHS AND TRIMS MUST BE ORDERED SEPARATELY.
MODEL NUMBER:
TRIM KITS:
T010.430 Diverter Valve Trim
Valve Trim ONLY. L
ESS Valve.
ROUGH VALVE BODIES:
R420 Two-Way In-Wall Diverter Valve Rough
1/2" NPT inlets/outlets. Less Handle.
R430 Three-Way In-Wall Diverter Valve Rough
1/2" NPT inlets/outlets. Less Handle.
NOTE:
Cannot be used as a shut-off valve.
T010.430
Diverter Valve Trim. Less valve.
Finish Options
Product
Number
Description
PVD
Stainless
Steel
075
Polished
Chrome
002
TRIM KITS**
Product
Number
Description
ROUGH VALVE
BODIES
Meets the American Disabilities Act Guidelines
and
ANSI A117.1 Requirements for the
physically challenged.
70mm
(
2-5/8
)
ALL CONNECTIONS 1/2" NPT
FINISHED
WALL
FINISHED
WALL
41mm MIN.
(1-5/8)
66mm MAX.
(2-5/8)
71mm
(2-3/4)
57mm HOLE SIZE
(2-1/4)
