K41
Revised 2/08
© 2008 AS America Inc.
FloWise
®
DUAL FLUSH ELONGATED TOILET
WITH SEAT
❏
2479.216
• Vitreous china
• Meets definition for HET (High Efficiency Toilet)
• Low-consumption Dual Flush Toilet
• Qualifies in LEEDS Program
Full flush 6.0 Lpf/1.6 gpf,
Partial flush 3.0 Lpf/0.8 gpf
• Elongated wash down bowl
• Internal trapway fully-glazed,
2-5/8" (67mm) trapway
• Concealed trapway bowl
• Chrome-plated top mounted push
button actuator
• Sanitary Dam on bowl
• Includes color-matched plastic seat and cover
• 100% factory flush tested
• 2 color matched bolt caps
• 2 year warranty
❏
2479.516
• Same as above, except with tank
with Aquaguard liner
Separate Component Parts:
❏
3067.216 Elongated Bowl
❏
4035.216 Unlined Tank
❏
4035.516 Tank with Aquaguard Liner
Alternate Tank Configurations Available:
❏
4035.516 Lined Tank
Nominal Dimensions:
31-1/4" x 17" x 30-1/8"
(794 x 432 x 765mm)
Fixture and seat only, supply by others
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M
• CSA B45 series
• City of Los Angeles Supplemental
Purchase Specification
• UNAR
• US EPA WaterSense Specification for HETS
FloWise
®
DUAL FLUSH
ELONGATED TOILET
VITREOUS CHINA
To Be Specified:
❏
Color:
❏
White
❏
Supply with stop:
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12”) FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
FOR ADDITIONAL INFORMATION REFER TO INSTALLATION INSTRUCTIONS
SUPPLIED.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerance established by ANSI Standard A112.19.2 These measurements are
subject to change or cancellation. No responsibility is assumed for use of super-
seded or voided pages
Certified by
IAPMO R&T
NN
NN
NN
$-0'065-&5
'*/*4)&%8"--
164)
#6550/
NNNN
NN
$-
NN
$-0'4&"51045)0-&4
NN $&/53&4
NN
'*/*4)&%
'-003
NN
NN
NN
NN
NN
NN
N
N
4611-:
"4
3&2h%
NN
