- 1 -
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
Congratulations on purchasing your American Standard faucet
with Speed Connect drain, a feature found only on American
Standard faucets.
Speed Connect
®
Drain*
• 1/3 of the parts, installs in 1/3 of the time
• No tools needed
• Never needs adjustment
• Guaranteed to seal properly the first time, every time.
*Your new American Standard faucet is designed to work only with the Speed Connect drain.
To ensure that your installation proceeds smoothly-please read these instructions carefully before you begin.
RECOMMENDED TOOLS
1
M968882 Rev. 1.7 (11/17)
INSTALL FAUCET
COLONY SOFT
SINGLE CONTROL LAVATORY FAUCET
WITH SPEED CONNECT
®
DRAIN
INSTALLATION
INSTRUCTIONS
2175.503
Adjustable Wrench
Screwdriver
Channel Locks
Tubing Cutter
Plumbers' Putty or Caulking
Certified to comply with ANSI A112.18.1M
CAUTION
Turn off hot and cold water
supplies before begining.
CARE INSTRUCTIONS:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
Fig. A.
Fig. B.
(HAND TIGHTEN)
3
1
2
4
3
PUTTY
• Apply a bead of putty along the edge of the underside of the FAUCET
(1)
.
• Insert FAUCET
(1)
and CABLE CONNECTOR
(2)
through center hole
of mounting surface.
Fig. A
.
• From under side of mounting surface thread the two MOUNTING
NUTS
(2)
onto FAUCET SHANKS
(4)
.
Fig. B
.
• Center FAUCET
(1)
and hand tighten MOUNTING NUTS
(3)
to
secure FAUCET
(1)
.
