CHANDLER™ AMERICAST™ ISLAND SINK
WITH FAUCET HOLES 7182.001/7182.803
WITHOUT FAUCET HOLES 7182.000
ISLAND SINK MODEL 7182.001/803
ISLAND SINK MODEL 7182.000
Installation
Instructions
7 9 1 2 6 7 - 4 0 0 R e v . C
Thank you for selecting American-Standard...the benchmark
of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--please
read these instructions carefully before you begin.
BEFORE YOU BEGIN...Unpack new sink and
inspect carefully for damage. Replace the sink
in its original packing carton to protect it until
you are ready to begin installation.
™
CUTOUT DIMENSIONS FOR SINK
Recommended Tools & Materials
Silicone Sealant
Putty Knife
Pipe Wrench
Channel Locks
Phillips Screwdriver
Regular Screwdriver
Adjustable Wrench
Drill
Locate and mark center lines of sink on countertop.
Provide proper clearance under the countertop for
the faucet supply lines and the structural parts of the
cabinet.
Cut out correct template and trace the cut line onto
the countertop at the proper location.
NOTE: If replacing an existing sink be certain to shut
off water supplies before removing old sink.
Mineral Spirits
Basin Wrench
Saber Saw
Tubing Cutter
Tape Measure
Hacksaw
Scissors
Product names listed herein are trademarks of American Standard Inc. unless otherwise noted.
© American Standard Inc. 2003
6-23/32"
(171mm)
6-23/32"
(171mm)
14" (356mm)
14" (356mm)
14-1/2" Radius
(368mm)
14-1/2" Radius
(368mm)
15" (381mm)
3/4" (19mm)
CENTER LINE
SINK
OUTLINE
SINK
OUTLINE
1/2"TYP.
1/2"TYP.
1/2"TYP.
CUTTING
LINE
CUTTING
LINE
CUTOUT FOR NEW INSTALLATION
CUTOUT FOR NEW INSTALLATION
MODIFICATION REQUIRED TO FIT ISLAND SINK
WITH FAUCET HOLES INTO A STANDARD
15" X 15" SINK CUTOUT
NOTE: CHANDLER ISLAND SINK WITHOUT
FAUCET HOLES DOES NOT FIT INTO A
STANDARD 15" X 15" SINK CUT OUT
8-11/32"
(212mm)
14"
(356mm)
15 "
(381mm)
16-1/2" (419mm)
14" (356mm)
SINK
OUTLINE
CUTTING
LINE
Certified to comply with ANSI A112.19.4.M
U.S. Patent No. 4,664,982
Other patents pending.
CAN/C.S.A. B-45
Observe local plumbing and building codes.
6-23/32"
(171mm)
6-23/32"
(171mm)
7-25/32"
(198mm)
11-9/32"
(287mm)
5-21/32"
(144mm)
12-3/8"
(314mm)
14-1/2" Radius
(368mm)
14-1/2" Radius
(368mm)
15-9/16"(395mm)
16-1/2" (419mm)
CENTER LINE
OF BOWL
