by
C O L L E C T I O N
™
T H E
Connect water supply to FAUCET (1) with 1/2" IPS FLEXIBLE
SUPPLIES (3) or 3/8" O.D. BULL-NOSE RISERS (4). Use
adjustable wrench to tighten connections. Do not over tighten.
Be careful not to kink copper supply when bending. Use tubing
cutter to cut to proper length.
Secure FAUCET (1) with ATTACHMENT NUTS (2) supplied.
(HAND TIGHTEN).
SECURE FAUCET AND MAKE WATER
SUPPLY CONNECTIONS
Plumbers' Putty or Caulking
Adjustable Wrench
Channel Locks
TOOLS REQUIRED
1
2
M 9 6 8 2 8 6
INSTALL FAUCET
2471
Certified to comply with ASME A112.18.1M
Certifié ASME A112.18.1M
Thank you for selecting American-Standard...the benchmark of fine
quality for over 100 years.
To ensure that your installation proceeds smoothly--please read
these instructions carefully before you begin.
Installation
Instructions
CenterSet Faucet
2
FERRULE
COUPLING NUT
(HAND TIGHTEN)
2
1
3
4
NOTE: FLEXIBLE SUPPLIES OR BULL-NOSE RISERS MUST BE
PURCHASED SEPARATELY.
Insert faucet SHANKS through holes of SINK. Place
faucet as far forward as possible.
Apply a bead of PUTTY along the edge of the
underside of the BODY (1). Insert LIFT ROD (2)
through hole in BODY (1).
SINK
1
PUTTY
SHANK
Turn off hot and cold water supplies before beginning.
CAUTION
Basin Wrench
Tubing Cutter
