K53
© 2006 American Standard Inc.
Revised 5/05
CADET™ RIGHT HEIGHT™
ELONGATED TOILET
VITREOUS CHINA
NOTES:
THIS TOILET IS DESIGNED TO ROUGH-IN AT A MINIMUM DIMENSION OF
305MM (12") FROM FINISHED WALL TO C/L OF OUTLET.
SUPPLY NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
*
DIMENSION SHOWN FOR LOCATION OF SUPPLY IS SUGGESTED.
IMPORTANT:
Dimensions of fi xtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
305mm
(12)
756mm
(29-3/4)
C/L OF OUTLET
83mm
(3-1/4)
FINISHED WALL
225mm
(8-7/8)
19mm ± 6mm
(3/4 ± 1/4)
419mm
(16-1/2)
470mm
(18-1/2)
C/L OF SEAT POST HOLES
140mm (5-1/2 CENTERS)
311mm
(12-1/4)
178mm
(7)
16mm
(5/8)
FINISHED
FLOOR
813mm
(32)
235mm
(9-1/4)
152mm
(6)
495mm
(19-1/2)
254mm
(10)
SUPPLY
AS
REQ'D
375mm
(14-3/4)
*
To Be Specifi ed:
❏
Color:
❏
Seat: American Standard #5324.019 “Rise and
Shine" solid plastic closed front, seat with cover.
❏
Seat: American Standard #5311.012 “Laurel"
molded closed front seat with cover.
❏
Alternate Seat:
❏
Supply with stop:
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES AND
ANSI A117.1 REQUIREMENTS FOR ACCESSIBLE AND USABLE
BUILDING FACILITIES-CHECK LOCAL CODES.
CADET™ RIGHT HEIGHT™
ELONGATED TOILET
❑
2998.012
• Vitreous china
• Low-consumption (6.0 Lpf/1.6 gpf)
• 16-1/2" rim height for accessible applications
• Elongated siphon action jetted bowl
• AquaForce fl ushing technology
• Fully glazed 2" trapway
• Close-coupled tank with raised lip detail on
tank cover
• Color-matched trip lever
• Speed Connect™ tank/bowl coupling system
• Sanitary bar on bowl
• 2 bolt caps
• 100% factory fl ush tested
❑
3417.016
Bowl
❑
4112.016
Tank
❑
2998.164
with Slotted Rim for Bedpan holding
❑
3417.164
Bowl
❑
4112.016
Tank
Alternate Tank Confi gurations Available:
❑
4112.300
Tank complete with chrome all metal
trip
lever
❑
4112.500
Tank complete with Aquagard liner
❑
4112.600
Tank complete with tank cover
locking
device
❑
4112.700
Tank complete with Aquagard liner and
tank cover locking device
❑
4112.800
Tank complete with trip lever located
on right side
❑
4112.900
Tank complete with tank cover device
and trip lever located on right side
Nominal Dimensions:
756 x 495 x 813mm (29-3/4" x 19-1/2" x 32")
Fixture only, seat and supply by others
Compliance Certifi cations -
Meets or Exceeds the Following Specifi cations:
• ASME A112.19.2M for Vitreous China Fixtures -
includes Flush Performance, Ball Pass Diameter,
Trap Seal Depth and all Dimensions
