background image

J29

BARRIER FREE

© 2008 AS America Inc.

FINISHED WALL
OR SPLASHBACK

102mm

(4)

616mm

(24-1/4)

OPTIONAL

183mm

(7-3/16)

67mm

(2-5/8)

457mm

(18)

C/L

COUNTERTOP (BY OTHERS)

FINISHED FLOOR

203mm

(8)

1-1/4 O.D

TAILPIECE

1-1/4 O.D.

WASTE

SUPPLIES
AS REQ'D

248mm

(9-3/4)

19mm

(3/4)

343mm

(13-1/2)

SEALING
COMPOUND

178mm

(7)

178mm

(7)

*

*

787mm (31)

845mm (33-1/4)

845mm

(33-1/4)

70mm

(2-3/4)

610mm

(24)

152mm

(6)

MAX.

BARRIER FREE

CLEARANCE

686mm

(27)

MIN.

203mm

(8)

MIN.

229mm

(9)

MIN.

DRAWING FOR 

DIMENSIONAL 

PURPOSES ONLY. 

IT IS NOT AN EXACT 

REPRESENTATION.

ANTIQUITY™ 

COUNTERTOP SINK

VITREOUS CHINA

ANTIQUITY™ COUNTERTOP SINK

•  Turn-of-the-century detailing on countertop sink
•  Made from vitreous china
•  Self-rimming with cutout template supplied
•  Front overflow
•  Faucet ledge (faucet not included)

 

0558.017 Faucet holes on 8" (203mm) centers

 

0554.012 Faucet holes on 4" (102mm) centers

 

(illustrated)

 

Nominal Dimensions:  
616 x 457mm
(24-1/4" x 18")

Bowl sizes:
432mm (17") wide
267mm (10-1/2") front to back
140mm (5-1/2") deep

Compliance Certifications -
Meets or Exceeds the 
Following Specifications:
• ASME A112.19.2M for 
  Vitreous China Fixtures

To Be Specified:

  Color: 

  White   

  Bone   

  Linen

*Faucet:

  Faucet Finish:

❏ 

Supplies:

  1-1/4" Trap:

* See faucet section for additional models available

MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1  ACCESSIBLE AND USABLE
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.

Install lavatory 864mm (34") from finished floor.
Lavatory installed 70mm (2-3/4") minimum from front edge
of countertop provides 686mm (27") knee clearance area.  

NOTES:

*

 DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE 

SUGGESTED.

FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE 

TEMPLATE SUPPLIED WITH SINK.

FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED 

SEPARATELY.

SEALING COMPOUND SUPPLIED BY OTHERS.

IMPORTANT:  Dimensions of fixtures are nominal and may vary within the 

range of tolerances established by ANSI Standard A112.19.2.

These measurements are subject to change or cancellation. No responsibility  

is assumed for use of superseded or voided pages.

Revised 2/08

Отзывы: