How to install
Black Lower Rear Valance Decal (99-04 GT, V6, Mach 1)
Time:
15 minutes
Tools:
Squeegee (included with Valance)
Spray bottle with distilled water and soap mix
Note:
This install was completed on a 2000 Mustang V6
Prep Work:
Clean rear valance area thoroughly and make sure its dry, its best to complete the install in a
cool clean place away from the sun.
1.
Spray the Valance generously with soap and water mix ensuring that the area to be covered has
soap and water all over it.
2.
Remove the Valance cover from the 3M paper and spray the sticky side generously with the
soap and water mix.
