Raxiom Smoked Mustang Tail Lights (99-04) - Installation Instructions
The below installation instructions work for the following products:
Raxiom Smoked Mustang Tail Lights (99-04)
Mustang Stock Replacement Taillights - Pair (99-04)
Mustang Stock Replacement Taillight - LH (99-04)
Mustang Stock Replacement Taillight - RH (99-04)
Please read through the instructions carefully before starting this project. Take the time to get all the materials together as
well as all the safety equipment.
Tools needed:
1/4 inch or 3/8 inch Drive Socket Wrench
7/16in Deep Socket (1/4 inch or 3/8 inch Drive)
Plastic Body Panel Fastener removal tool
(Two) Flat Head Screw Drivers
Removal of Stock Taillight:
1.
First thing you need to do is open the trunk and locate the plastic trunk hinge surround covering the trunk latch.
2.
Next remove the four plastic body panel fasteners with the body panel tool. (if you have one) If not you can use two flat
head screw drivers together to pry the fasteners out.
3.
Now remove the plastic panel from the trunk.
Here you can see the surround panel and the four fasteners, and also the center trim panel beneath it.
