American Megatrends Super Voyager VLB-III Скачать руководство пользователя страница 96

Страница: 96 / 138

Chapter 4 AMIBIOS Setup

Advanced Setup, Continued

Above 1 MB Memory Test

When this option is enabled, the BIOS memory test is performed on all

system memory. When this option is disabled, the memory test is done

only on the first 1 MB of system memory. The settings are

Enabled

Disabled.

The Optimal default setting is

Disabled.

The Fail-Safe default

setting is

Enabled.

Memory Test Tick Sound

This option enables (turns on) or disables (turns off) the ticking sound

during the memory test. The settings are

Enabled

Disabled.

The

Optimal and Fail-Safe default settings are

Enabled.

Memory Parity Error Check

This option enables or disables parity error checking for system RAM.

The settings are

Enabled

(all system RAM parity is checked) or

Disabled

(parity is checked only on the first 1 MB of system RAM). The Optimal

default setting is

Enabled.

The Fail-Safe default setting is

Disabled.

Hit <DEL> Message Display

Disabling this option prevents

Hit <DEL> if you want to run Setup

from appearing when the system boots. The settings are

Enabled

Disabled.

The Optimal and Fail-Safe default settings are

Enabled.

Содержание Super Voyager VLB-III











































































































































Результаты поиска

Содержание Super Voyager VLB-III

Отзывы:

American Megatrends Super Voyager VLB-III, Руководство пользователя, Страница: 96 / 138

Результаты поиска

Содержание Super Voyager VLB-III

Отзывы: