American Megatrends Merlin DP Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 69

American Megatrends Merlin DP Скачать руководство пользователя страница 37

Chapter 2 WINBIOS Setup

Advanced Setup

Advanced Setup options are displayed by choosing the Advanced icon from
the WINBIOS Setup main menu. All Advanced Setup options are described in
this section.

Typematic Rate

This option sets the rate at which characters on the screen repeat when a key is
pressed and held down. The settings are Slow or Fast. The Optimal and Fail –
Safe default settings are Fast.

System Keyboard

This option does not specify if a keyboard is attached to the computer. Rather,
it specifies if error messages are displayed if a keyboard is not attached. This
option permits you to configure workstations with no keyboards. The settings
are Absent or Present. The Optimal and Fail – Safe default settings are Present.

Primary Display

This option configures the type of monitor attached to the computer. The
settings are Mono, CGA40x25, CGA80x25, VGA/EGA, or Absent. The Optimal
and Fail – Safe default settings are VGA/EGA.

Mouse Support

Set this option to Enabled to enable AMIBIOS support for a PS/2 – type
mouse. Pins 1 – 2 of J23 on the motherboard must be shorted together to
enable PS/2 mouse support . The settings are Enabled or Disabled. The Optimal
and Fail – Safe default settings are Enabled.

Cont’d

«
...
35
36
37
38
39
...
»

Содержание Merlin DP






































































Отзывы:

Нет отзывов