manualshive.com logo in svg

American Megatrends AMI 386SX, Предварительное руководство, Страница: 6 / 52

Поделиться
Скачать
American Megatrends AMI 386SX Скачать руководство пользователя страница 6

transcribed, stored in a retrieval system, translated into any language or

computer language, or transmitted in any form whatsoever without the prior

written consent of the publisher, American Megatrends, Inc.

LIMITED WARRANTY

Buyer agrees if this product proves to be defective, that American Megatrends,

Incorporated (hereafter referred to as AMI) is only obligated to replace or

refund the purchase price of this product at AMI's discretion.  AMI shall not

be liable in tort or contract for any loss or damage, direct, incidental or

consequential.  Please read enclosed warranty card.

Important Notice

AMI is not responsible for any errors or omissions in writing this manual.  AMI

reserves the right to change, modify or append any part or section of this

manual at any time.

TRADEMARKS

Intel, 286, 80286, 386, 80386, 486, 80486, 387, and 80387 are all trademarks of

Intel Corporation.

IBM and AT are trademarks of International Business Machines Corporation.

WEITEK is a trademark of WEITEK Corporation.

Содержание AMI 386SX





















































Отзывы:

Нет отзывов