manualshive.com logo in svg

American Megatrends AMI 386SX, Предварительное руководство, Страница: 42 / 52

Поделиться
Скачать
American Megatrends AMI 386SX Скачать руководство пользователя страница 42

The objective of this test is to determine whether the keys depressed match

with their Scan and ASCII codes.  Every time a key is depressed the scan code &

the ASCII code of the key is shown.

Use <CTRL><BREAK> key to abort this test.

4.6 Video Diagnostics

The Video diagnostics include the following for both Monochrome and Color

display adapter cards:

* Sync Test  -  Checks the Sync capability.

* Adapter Test

 -  Performs test on the Display

    Memory.

* Attribute Test

 -  Checks the attributes of the

    Display

* 80 x 25 Display Test

-  Checks the 80 x 25

    character set of the display

    adapter.

If you have a color display card installed, you will have the following

additional diagnostics functions.

* 40 x 25 Display test

* 320 x 200 Graphics test

* 640 x 200 Graphics test

* Page selection test

* Color test

The Video diagnostics functions do not require any inputs from the user. 

However, the test results are displayed on the screen.

4.7 Miscellaneous Diagnostics

These include the following tests :

* Serial Communication Port Test.

* Printer Port Test.

Serial Communication Port Test

This test requires a special RS-232C connector to be plugged on  to the port.

The details of this connector are as below :

   

* RD & TD Shorted.

* DSR & DTR Shorted.

Содержание AMI 386SX





















































Отзывы:

Нет отзывов