manualshive.com logo in svg

American Megatrends AMI 386SX, Предварительное руководство, Страница: 41 / 52

Поделиться
Скачать
American Megatrends AMI 386SX Скачать руководство пользователя страница 41

use these diskettes with.

Drive Speed Test

This test determines the speed of rotation of the drive. Please note that the

following are the allowable speeds for the various drives:

* 1.2 MB drive - 360 rpm with a 1.2 Mb diskette.

 300 rpm with a 360 Kb diskette.

* 360 KB drive - 300 rpm.

* 720 KB drive - 300 rpm.

Allow for a tolerance of 1% on all the speeds. Please ensure that the diskette

is formatted before performing this test.

Random Read/Write Test

WARNING:

 This test will erase all data on the disk under test.  Be sure you

have saved the data or are using a blank disk.

This test performs a random read/write operation on the diskette and in turn

checks the random seek, read/write capability of the drive.  Ensure that the

diskette is formatted before performing this test.

Sequential Read/Write Test

WARNING:

 This test will erase all data on the disk under test.  Be sure you

have saved the data or are using a blank disk.

This test performs a Sequential read/write operation and checks the sequential

seek, read/write capability of the drive.  Ensure that the diskette is

formatted before performing this test.

Disk Change Line Test

     

This test checks out the functioning of disk change line capabilities of the

diskette drives. This test is valid only for drives with the disk change line

feature (ie; 1.2 Mb-5 1/4" HD and 720 Kb-3 1/2" drive.)  NOTE: Test requires a

formatted diskette.

4.5  Keyboard Diagnostics

There is only one diagnostics test available for the keyboard.

Scan / ASCII Code Test

Upon invoking this test a keyboard layout is shown on the screen. This keyboard

layout might not necessarily correspond with your keyboard but will have the

keys you have on your keyboard.

Содержание AMI 386SX





















































Отзывы:

Нет отзывов