manualshive.com logo in svg

American Megatrends AMI 386SX, Предварительное руководство, Страница: 40 / 52

Поделиться
Скачать
American Megatrends AMI 386SX Скачать руководство пользователя страница 40

Seek Test

This test checks the seek capability of the Hard Disk on the specified Cylinder

& Head range. First a sequential seek is performed & then a random seek is

performed. Any errors during the test are reported.

Read/Verify Test

This test performs sequential & random read & verify operation on the specified

Cylinder, Head range.

Force Bad Tracks

This operation enables a User to define a list and mark tracks as bad.  Certain

specific applications require this option. (ie;Networking software)

4.4  Floppy Diagnostics

All the options under floppy diagnostics require more or less the following

inputs :

* Drive No.

* Start Track No.

* End Track No.

As in the case of hard disk the list below gives the effect of each of the

diskette tests :

Diskette Format

- Destructive

Speed Test

- Non Destructive

Random R/W Test

- Destructive

Sequential R/W Test

- Destructive

Disk Change Line Test

- Non Destructive

Diskette Format

WARNING:

 This test will erase all data on the disk under test.  Be sure you

have saved the data or are using a blank disk.

This test allows an user to check out the Floppy controller's abilities to

format a diskette.  Note that this is only a test to check out the format

function of the controller.  The diskettes formatted with this option does not

have the file structure to hold files for any operating system like DOS. You

have to format these diskettes again under the operating system you intend to

Содержание AMI 386SX





















































Отзывы:

Нет отзывов