manualshive.com logo in svg

American Megatrends AMI 386SX, Предварительное руководство, Страница: 24 / 52

Поделиться
Скачать
American Megatrends AMI 386SX Скачать руководство пользователя страница 24

To change the keyboard option, use the 

PgUp

 and 

PgDn

 keys.

Video BIOS shadow Setup

The screen displays:

Video BIOS shadow   : Enabled

The help window displays:

Options:-

Enabled  : Shadow RAM ON

Disabled : Shadow RAM OFF

The BIOS enables the Shadow RAM feature initially.  It enables the RAM to

shadow the ROM of video display adapters which have their video driver routines

kept inside the adapter ROM.  Since the AT slots run at speeds very much slower

than the CPU, the performance of the system gets affected if the video drivers

are executed from the ROM. To beef up the performance, the video drivers in ROM

are copied to faster motherboard memory and executed from there.  This concept

is called Shadow RAM.

To change the Video BIOS shadow option, use the 

PgUp

 and 

PgDn

 keys.

Scratch RAM option

The screen displays:

Scratch RAM option : 1

The help window displays:

if required, BIOS will use 256 bytes of RAM

(1) : Using BIOS stack area at 0030:0000

(2) : Reducing base memory size by 1KB

To change the scratch RAM option, use the 

PgUp

 and 

PgDn

 keys.

MAIN BIOS shadow Setup

The screen displays:

MAIN BIOS shadow   : Disabled

The help window displays:

Options:-

Enabled  : Shadow RAM ON

Disabled : Shadow RAM OFF

To change the Main BIOS shadow option, use the 

PgUp

 and 

PgDn

 keys.

Содержание AMI 386SX





















































Отзывы:

Нет отзывов