American Innovations MicroMax GPS360, Руководство пользователя

Страница: 48 / 68

Interrupters User Guide
Chapter 5: Interrupter Programming 43
For information on how to export or delete a saved template, refer to Exporting or Deleting Saved
Templates on page 52 .
If a saved template is available to use, complete the steps described in one or both of the following
sections:
l
Importing a Saved Template on page 50 — complete these steps first if the template is saved
on your laptop or computer but has not yet been imported into Bullhorn Tools.
l
Applying a Saved Template on page 51 — complete these steps if a saved template is currently
available to use from Bullhorn Tools.
Setting Up Interruption Options
Interruption options, such as UTC Offset, Output Mode, Sync Mode, and Zero Crossing, can be set up
separately from the interruption programs.
Complete the following steps to set up the interruption options on the MicroMax interrupters:
1.
Click Interruption .
Figure 5-1. Interruption Options
2.
To change the UTC Offset, enter a value in the UTC Offset field. Refer to the following table
for commonly-used time zones.
Time Zone UTC
Eastern Standard Time –05
Central Standard Time –06
Table 5-1. Time Zone and UTC Examples