American Innovations MicroMax GPS360, Руководство пользователя

Страница: 29 / 68

Interrupters User Guide
Chapter 4: GPS360 Installation 24
Figure 4-1. Relay Cables
3.
If interrupting the AC power , remove the tap change bar from the taps and connect both of
the interrupter's relay cables to the same tap settings that were connected by the change bar.
4.
If interrupting the DC power :
a.
Disconnect DC output cable.
b.
Connect one of the interrupter's relay cables to the output.
c.
Slide shrink wrap tube on to the other relay cable.
d.
Connect the DC output cable to the interrupter's relay cable.
e.
Wrap relay cables in shrink wrap to prevent shorting the equipment.
Figure 4-2. Relay and DC Output Cable in Shrink Wrap
Connecting the GPS Antenna
After connecting the antenna, ensure that it has a clear view of the sky to get optimum connection
to the satellites.