American Innovations APM4AM-SAT WS, Руководство по установке и настройке

Страница: 8 / 46

2 Chapter 1. Installation

Installation drawing (provided)

IBM-compatible computer with the following hardware and
software specifications:
Hardware
•
Pentium 90 computer (minimum) with CD-ROM drive
•
Spare RS232 serial port or USB port
N
OTE
:
If your computer has a USB port instead of a RS232
serial port, use a USB/RS232 adapter cable with the
configuration cable included in the UCT installation kit.
•
Minimum 16 megabytes of memory
•
6 megabytes of hard disk space
Software
•
Microsoft
®
Windows XP operating system with Service Pack 2
or 3, or Vista
®
Home Premium, Business, or Ultimate with
Service Pack 1 or higher
•
Windows .NET Framework version 1.1 or higher (provided)
•
Universal Configuration Toolkit (UCT) software (provided)
•
USB device driver (provided)
•
Internet Explorer (IE) version 5.5 or higher
•
Acrobat Reader version 5.0 or higher
Batteries
The APM4AM-SAT WS uses a rechargeable, sealed lead acid battery
(12 volt, 3.4 Amp. Hr.).
A battery charger is also included to keep the lead acid battery charged. A
red LED indicates that the charger is in fast charge mode; a green LED
indicates that the charger is in float charge mode.
N
OTE
:
The battery charger will shut down if the output terminals are
inadvertently shorted or there is excessive output current. Cycle input
power to return charger to normal operation.