View Manager 16 Plus
USER'S QUICK GUIDE
Displays the Dome's ID Code.
Initiates the currently selected
SpeedDome's Apple Peel
pattern.
Toggles the state of the
dome's output.
Invokes the menu.
Displays currently selected
camera number, Quick View
number or Pattern number.
Also displays system prompts
and messages.
Clears the last keypad entry
or active alarm.
Opens or closes the camera's iris,
making the picture on the monitor
appear darker or lighter.
Flips the currently
selected SpeedDome
180° .
Calls up a Quick View.
Calls up video from a specific
camera.
Calls up a Pattern one time.
Repeats a Pattern indefinitely.
Initiates the Sequence.
Enables you to step through
the installed cameras—one at a
time—in sequential order.
Controls the camera's zoom function.
Can be swapped with focus.
Sequences through the available
monitor display modes: 2x2, 3x3,
4x4, and full-screen.
Controls the camera's focus function.
Can be swapped with zoom.
Controls the camera's pan and tilt function.
Also allows you to interface with the menu.
Menu
Calibration
Define Sequence
Setup View
Record Pattern
Alarm Actions
Config Devices
Reset Dome
Select Language
Tog Primary / 2nd
Tog Zoom / Focus
Adjust V-Phase
Show Sys Info
Ping Dome / TTR
Press the
Menu
button on the keypad to
invoke the menu. This scrollable menu is
displayed on the LCD. Only two menu
selections are visible at one time on the
LCD.
Move the Tracker Ball up and down to
scroll through the menu selections. To
select the item on the top line of the LCD
(in this example Define Sequence), press
the button on the left side of the Touch
Tracker. To select the item on the bottom
line of the LCD (in this example Setup
View) press the button on the right side of
the Touch Tracker.
Apple Peel
The “Apple Peel” is comprised of three
revolutions of camera panning, with tilt
starting at the ceiling line. Each revolution
tilts down approximately 30°. The Apple
Peel will provide you with a complete view
of the area.
APPLE PEEL PATTERN
8000-1011-01, Rev. E
CCTV PRODUCTS
