RASO AND RASI SERIES SPEEDDOME OPTIMA
8000-2692-13, REV. C
QUICK REFERENCE GUIDE
4 of 8
Supported Controllers and Matrix Switching Systems
SpeedDome Optima may be used with the following controllers and matrix switching systems. See notes below for specific limitations or restrictions.
Feature
VM16 /
ADTT16
Series
VM32 /
AD32 Series
VM96
Series
AD2150 /
AD2350
(1, 2)
MegaPower
LT
MegaPower
48
(1, 2)
AD1650
(1, 2)
AD168
(1, 2)
AD2050
(1, 2)
AD
MegaPower
1024
(1, 2)
Supported
Protocols
SensorNet SensorNet RS-422
SensorNet
Manchester
RS-422
SensorNet
Manchester
RS-422
SensorNet
Manchester
RS-422
Manchester
RS-422
SensorNet
Manchester
RS-422
Manchester
RS-422
Maximum
Available
Presets
96 96
Unlimited
(3)
64
Manchester
16
RS-422
96
64
Manchester
96
RS-422 (6)
96
SensorNet
64
Manchester
16
RS-422
64
Manchester
64
RS-422 (6)
64
SensorNet
64
Manchester
16
RS-422
64
Manchester
16
RS-422
Maximum
Available
Patterns
(4)
3 3 3 3 3
3 3 3 3 3
DirectSet
menu
(5)
Yes
(7)
No No No
Yes
(8)
Yes
(8)
No No No No
NOTES:
(1) For the list of compatible keyboards, see
(2) RS-422 is supported with the appropriate code converter.
(3) Preset information is stored at the host, not the dome.
(4) Patterns are limited by time and the number of available dome commands. Total time for the patterns cannot exceed 6 minutes 50 seconds.
Total number of dome commands used in the patterns cannot exceed 99.
(5) Although text overlay is not supported, the following DirectSet menu commands are supported: Return to Auto Iris/Focus, Flip, Peel and Dome
Reset. See
on page 3 for more information.
(6) If the RS-422 Code Converter is used, only 16 presets are supported.
(7) Requires firmware version 0701-2833-0103 (EEPROM) / 0701-2834-0201 (Flash) or newer.
(8) Requires a compatible keyboard with a DirectSet key (ADCC0200 or ADCC0300).
