American Dynamics Multivision Quest TMV910Q, Руководство пользователя

Страница: 42 / 80

User’s Guide
34 Advanced Setup Using On-Screen Menus
Alarm Real Rec
Used to enable/disable real-time recording during an alarm. If “ Yes ” is selected, the
Alarm NC/NO output (in the external IO connector of the multiplexer) must be
connected to the VCR Alarm-in to trigger real time recording. Please check the VCR
manual to decide whether a NC or NO signal should be used.
Rec Time
Select the recording period from one of the following options: SYNC , 1Hr
~
999Hr .
In real-time mode, recording period depends on the length of the tape (2 hours for a T-
120 tape, 3 hours for a T-180 tape).
“SYNC” indicates that the multiplexer output video signal will be synchronized with
the VCR (recommended for the highest quality recording with all VCRs that feature a
SW Out or Trig Out connection). Connect the VCR Trigger input (in the external IO
connector) to the VCR's
SW Out or Trig Out ( SW Out ).
Rec Density
Select standard/double/triple density according to the Time Lapse VCR setting. The
double/triple density feature is sometimes called “virtual real time”, and indicates a
higher recording bandwidth. Thus, a smoother image is accessible using this kind of
time lapse VCR.
Sync-Trig Edge
Used to select the rising or falling edge of the sync (trigger) signal from the VCR.
Date/Time Position
When VCR playback video is shown on the Main Monitor, both the camera titles and
date/time display of windows showing playback will be reversed, to distinguish
from Live mode. This menu allows you to choose the VCR date/time OSD (on-screen
display) position. In the VCR Set Up menu, move the cursor to
9 Date/Time Position
and press
Enter
. The menu will disappear, and only the playback date/time display
will remain on the screen. Use the Direction keys to move the OSD (on-screen display)
to the desired position.