80
Intellex
®
Digital Video Management System Installation and Operating Instructions
Date/Time Setup
MORE>>>
DATE/TIME SETUP
The
Date/Time Setup
screen lets you change the unit’s date and
time settings, which the unit encodes on each image. You must
possess the
Setup Date/Time
privilege to access it (see
NOTE: In network installations,
Network Client
maintains the
master clock and can update each unit’s date and time
daily. Therefore, except for initial setup, adjusting the
system date and time may have no effect. Refer to the
Network Client
instructions for more information.
1.
From the main screen, click the
Setup
button. The
Setup
Options
screen appears (see
).
2.
Click the
Date/Time
button. A warning screen appears.
3.
Select
Yes
to proceed. Click
No
to close this screen and return
to the
Setup Options
screen.
Use the
Time
option to change the system time.
1.
Click the hours display. Click up arrow or down arrow to
display the desired number of hours (24-hour format).
2.
Click the minutes display. Click up arrow or down arrow to
display the desired number of minutes.
3.
Click the seconds display. Click up arrow or down arrow to
display the desired number of seconds (five-second
increments).
Use the
Date
option to change the system date.
1.
Click down arrow to display the calendar.
2.
Click left arrow to select the previous month or right arrow to
select the next month.
3.
Click the day of the month to select the day. The calendar
closes and the selected date is displayed.
Use the
Set
option to assign the new system date and time. The
unit displays a confirmation screen.
Select
No
to close this screen and return to the date/time setup
screen. Select
Yes
to stop recording and assign the new date and
time to the system. The unit displays the date/time screen with a
confirmation message. Click
Close
to close the screen and return
to the
Setup Options
screen.
