American Dynamics Intellex DV16000 Скачать руководство пользователя страница 24

Страница: 24 / 201

Intellex

Digital Video Management System Installation and Operating Instructions

Time Zone Settings

MORE>>>

TIME ZONE

SETTINGS

You must configure the unit for operation in your time zone. The
unit will keep track of daylight savings time if applicable.

To configure the time zone:

NOTE: Do NOT change any other time settings or you may affect

unit operation. Refer to

Date/Time Setup

for information

about setting the system date and time.

From the

Control Panel

screen, double-click the

Date/Time

icon. The

Date/Time Properties

screen appears.

Select the

Time Zone

tab. The

Time Zone

tab of the

Date/Time Properties

screen appears.

Click down arrow to display a list of time zones.

Since the list of time zones is too long for the display area, a
scroll bar appears along the right side, with arrows at the top
and bottom and a slide button between.

Use the scroll bar to display time zones that are hidden. Click
up arrow or down arrow or drag the scroll button up or
down.

When you locate the correct time zone, select it. The list
disappears and the time zone name is displayed in the box.

The system can also

Automatically adjust clock for

daylight saving changes

. Click the checkbox to select

(check) or de-select (un-check) this option.

Select

Cancel

to close this screen without changing the time

zone and return to the

Control Panel

screen. Select

accept the new time zone, close this screen and return to the

Control Panel

screen.

Содержание Intellex DV16000










































































































































































































Результаты поиска

Содержание Intellex DV16000

Отзывы:

Похожие инструкции для Intellex DV16000

Бренды по названию

Популярные бренды

American Dynamics Intellex DV16000, Инструкция по установке и эксплуатации

Результаты поиска

Содержание Intellex DV16000

Отзывы:

Похожие инструкции для Intellex DV16000

Бренды по названию

Популярные бренды