American Dynamics ADCI625-P221, Конфигурация и руководство пользователя

Страница: 32 / 142

View Menu
4-22 Configuration and User Guide
Procedure 4-4 Restore Picture Balance Defaults
Step Action
1
Select
Picture Settings
from the
View
menu.
2
Select the
Picture Balance
tab.
The Picture Balance tab displays.
3
Select
Defaults
to restore the default settings.
The default settings are 50%.
- End -
Focus/Iris
When Auto Focus and Iris are enabled the camera automatically compensates for scene changes
that effect focal length (focus) and light levels (iris).
If Auto Iris and Focus are turned off a feature called ‘Return Settings’ (refer to Procedure 6-3
Enable/Disable Return Settings) can be configured to automatically return Focus and Iris to Auto
modes after the dome is commanded to move a sufficient amount (about half a screen width
,
and
more than a few seconds).
Note
Auto Focus and Auto Iris can also be adjusted, enabled and disabled using GUI Camera Controls.
Setting Auto Focus
Enable or disable auto focus on the dome.
Procedure 4-5 Enable/Disable Auto Focus
Step Action
1
Select
Picture Settings
from the
View
menu.
2
Select the
Focus/Iris
tab.
The Focus/Iris tab displays.
3
Select the
Auto Focus
check box to enable auto focus.
Or
Deselect the
Auto Focus
check box to disable auto focus.
The default setting is ‘Enabled’.
- End -