manualshive.com logo in svg

American Dynamics ADCI625-P221, Конфигурация и руководство пользователя

Поделиться
Скачать
American Dynamics ADCI625-P221 Скачать руководство пользователя страница 24

Web Configuration 

 

3-14

Configuration and User Guide

GUI Icons

The following provides information on the icons used throughout the dome interface. These icons 

will be referenced throughout this manual: 

Viewing Live Video via the Live Video Pane

The live video pane provides a simple way to view the video inputs from the dome when using the 

setup menus. The live viewing page however is not intended to be the primary way of viewing the 

video on the dome; this should be performed using the Network Video Recording device.

Viewing Live Video via the Live Video Pane

The Live Video Pane is accessible to any authorized user and is displayed when accessing the 

setup menus. It is not displayed on the following pages; Scheduled Tasks, Alarms, Logs and 

Current Faults.

Select to start the live video 

pane.

Select to stop the live video 

pane.

Check box, deselected.

Check box, selected. 

Volume is active. Use the 

Volume Control slider bar to 

adjust the volume. 

Volume has been muted. 

Pan and tilt quick control

Refresh the current tab.

View or activate the 

corresponding function.

Edit the corresponding function.

Delete the corresponding 

function.

Slider bar - The slider bar can be moved 

left or right using the mouse. For fine 

adjustments, select the slider bar with the 

mouse and use the left and right arrow 

keys on the PC keyboard to adjust the 

slider.
Select the page number or arrows to 

navigate the pages. 

Содержание ADCI625-P221















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды