American Dynamics ADCI625-P221 Скачать руководство пользователя страница 17

Страница: 17 / 142

Installation

2-7

Installing the Illustra 625 PTZ Camera using DHCP Server Logs

Procedure 2-2 Installing the Illustra 625 PTZ Camera using DHCP Server Logs

Step Action

Using the Quick Start Guide install and connect the dome to the computer or network

which will be used for the configuration and power on.

The dome will begin its initial boot up sequence which will take approximately 1 to 2

minutes.

When using a DHCP Server the dome will automatically be assigned a Network IP

Address.

View the DHCP Server system logs and make note of the IP address assigned to the

dome.

Open Microsoft Internet Explorer and enter the URL of the dome as shown in the DHCP

Server log.

Note

The computer being used to configure the dome must have an IP address on the
same subnet.

Refer to the Web Configuration chapter for details on how to log in to the dome and

modify the configuration.

- End -

Installation without a DHCP Server using a Static IP Address

The following provides information for installing the dome on your network when no DHCP Server

is available. In this situation the dome will be assigned a Static IP Address.

Note

1 We recommend that once you are logged into the Web Configuration pages you change the

Static IP Address of the dome so that conflicts can be avoided when using the same Static IP
Address to setup additional cameras. Refer to TCP/IP for information on changing the IP
address of the dome.

2 In a situation where IP address conflicts arise, Illustra Connect can be used to discover the

device. Refer to IP Address Conflicts in the Illustra Connect User Guide for further information.

Procedure 2-3 Installing the Illustra 625 PTZ Camera when a DHCP Server is not

available

Step Action

Using the Quick Start Guide install and connect the dome to the computer or network

which will be used for the configuration and power on.

Содержание ADCI625-P221















































































































































Результаты поиска

Содержание ADCI625-P221

Отзывы:

Бренды по названию

Популярные бренды

American Dynamics ADCI625-P221, Конфигурация и руководство пользователя

Результаты поиска

Содержание ADCI625-P221

Отзывы:

Бренды по названию

Популярные бренды