Snap Shot LED SPECIFICATIONS:
LED:
220 LEDs
Working Position: Any safe working position
Power:
120V/60Hz
Power Draw:
15W
Weight:
4lbs./ 2Kgs.
Dimensions:
12.25”(L) x 10”(W) x 9”(H)
310 x 250 x 230mm
Warranty:
1 Year (365 days)
Unpacking: Thank you for purchasing the Snap Shot LED by American DJ®. Every Snap Shot LED
has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the
shipping carton for damage that may have occurred during shipping. If the carton appears to be dam-
aged, carefully inspect your fixture for any damage and be sure all accessories necessary to operate
the unit has arrived intact. In the case damage has been found or parts are missing, please contact our
toll free customer support number for further instructions. Do not return this unit to your dealer without
first contacting customer support.
Introduction: The Snap Shot LED is part of American DJ’s continuing pursuit for creating high qual-
ity affordable fixtures. The Snap Shot LED is a simple, small LED strobe. This strobe is light weight
and compact which makes it a great piece for mobile DJ’s, archtectural lighting, or ligting effect. The
flash speed can be adjusted using the knob on the rear of the unit. There are also IN/OUT mono plugs
located at the rear. These plugs are used to connect to other Snap Shot LED’s.
