background image

COPY BANK OF SCENES:

This function will copy the settings of one bank to another.

1. Press the 

PROGRAM BUTTON (FIG. 6)  

for three (3) seconds  to 

activate program mode. The 

LCD DISPLAY (FIG.3)

will indicate 

program mode by displaying a continuous fast blinking dot next 
to

‘PROG.’

2. Select the 

BANK (FIG.4)

you want to copy

3.  Press and release the 

MIDI/REC BUTTON (FIG.7) 

4. Select the 

BANK (FIG.4) 

you wish to record to.

5.  Press 

MUSIC/BANK COPY BUTTON (FIG.9), 

The 

LCD DISPLAY (FIG.3) 

will flash briefly to indicate the function has been completed.

DELETE BANK OF SCENES:

1. Select the 

BANK (FIG.4) 

you want to delete

2. Press and hold the 

AUTO/DEL BUTTON (FIG.8).

3

.

While holding down the 

AUTO/DEL BUTTON (FIG.8) 

press and hold 

the 

MUSIC/BANK COPY BUTTON (FIG.9) 

at the same time.

4. Release both buttons at the same time, the 

LCD DISPLAY (FIG.3) 

should flash momentarily to indicated the function completion.

DELETE SCENE :

This function will reset all DMX Channels in a single SCENE back to 0.

1. While pressing and holding 

AUTO/DEL(FIG.8),

Press and release the

SCENE BUTTON (FIG.2) 1-8 

you want to delete.

RESET ALL SCENES:

This function will erase all scenes in all Banks

(ALL Channels of all scenes are reset to 0 output).

1.  Press and hold down the PROGRAM button (fig.6)
2. While holding down the 

PROGRAM BUTTON (FIG.6)

, press and hold

the 

BANK DOWN BUTTON (FIG.4).

3. Disconnect the power and release the buttons.
4. Reconnect the power, all scenes should be erased

American DJ Los Angeles, CA 90058 - 

DMX OPERATOR 

User Manual 

Содержание DMX OPERATOR























Отзывы: