background image

User Instructions

  Dekker LED                                             Introduction

©

American DJ

®

  -  www.americandj.com  - Dekker LED Instruction Manual Page 2

Rev. 5/12

Unpacking: 

Thank you for purchasing the Dekker LED by Ameri-

can DJ

®

. Every Dekker LED has been thoroughly tested and has been 

shipped in perfect operating condition. Carefully check the shipping 

carton for damage that may have occurred during shipping. If the 

carton appears to be damaged, carefully inspect your fixture for any 

damage and be sure all accessories necessary to operate the unit has 

arrived intact. In the case damage has been found or parts are miss-

ing, please contact our toll free customer support number for further 

instructions. Do not return this unit to your dealer without first contact-

ing customer support. 

Introduction: 

The Dekker LED is part of American DJ’s continu-

ing pursuit for creating high quality affordable intelligent fixtures. The 

Dekker LED is a DMX intelligent LED mooflower effect. This  fixture 

can be used in a stand alone mode or connected in a Master/Slave 

configuration. The unit can also be controlled via DMX controller. This 

wash has four operating modes: Sound Active mode, Auto mode, 

Static mode, and DMX control mode. 

 

Customer Support:

American DJ

®

 provides a toll free customer support line, to provide set 

up help and  to answer any question should you encounter problems 

during your set up or initial operation. You may also visit us on the web 

at www.americandj.com for any comments or suggestions.
Service Hours are Monday through Friday 8:00 a.m. to 4:30 p.m. 

Pacific Standard Time.

 

Voice:   

(800) 322-6337

 

Fax:    

(323) 582-2941

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.americandj.com
Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Caution! 

There are no user serviceable parts inside this unit. Do not 

attempt any repairs yourself, doing so will void your manufactures war-

ranty. In the unlikely event your unit may require service please contact 

American DJ.
PLEASE recycle the shipping carton when ever possible.

Содержание Dekker LED









Отзывы: