background image

Descriptions:

Congratulations with your purchase of this product.
Read this manual carefully before using our American Audio Rack Color LED. The 

 is a 19''/1U RGB LED Bar

with rainbow effect, providing 24 in color RGB LEDs, designed for the Working DJ. All parameters and work modes can be set 
up by LED remote operation.

Rack Color LED

Check for transport damage. 
You should be in possession of the following items:

1 Manual
1 LED Remote Control(Infrared Remote Control)

Rack Color LED

Delivery Packet:

Rack Color LED

Main Features:

Should you discover transport damage after unpacking the equipment, inform the hauler immediately. 
Never connect a damaged device. You may also contact your supplier.

User Instructions

- Easy-to-use 19'' LED bar used to light up your DJ rack(24 LEDs)
-LED Advantages: NO heat output, low power draw, long life LED operation
-3-pin XLR IN/OUT
-Master/Slave operation
-RC-1 infrared remote control included
-Control: color range, brightness & rainbow effect with pattern, speed and fadetime control
-LED Colors: Red, Cyan, Green, Magenta, Blue, Yellow, White & Amber
-Power Supply:DC12V, 500mA min included
-Dimensions(LxWxH): 3''x19x2''/76x482x50mm- 1 rack space
Weight: 1.5lbs/ 0.8kg

Customer Support:

American Audio provides a toll free customer support line, to provide set up help and to answer any question should you encounter 
problems during you set up or initial operation. You may also visit us on the web at www.AmericanAudio.us for any comments or 
suggestions.

Voice:(800) 322-6337
Fax:(323) 582-2610
E-mail:[email protected]

Service Hours are Monday through Friday 9:00 a.m. To 5:30 p.m. Pacific Standard Time.

American Audio

 - www.AmericanAudio.us 

LOS ANDELES,CA.90058

*Please Note:

 

Improvements and specifications in the design of the unit and the manual are subject to change without any prior written notice.

*Special Note

For reducing signal errors and avoiding signal transmission problems and interference, it is always advisable to connect 120 ohm 
impedance DMX signal cable and DMX terminator  for signal connection.

Notice Information:

P/N:24-004-2108-00Rev1.1

-Page 1-

Отзывы: