American Audio MCD-810 Скачать руководство пользователя

Страница: 11 / 34

and off. This button will also change the pitch
percentage the

PITCH SLIDER (10)

will react to.

The pitch percentage can be changed between
4%, 8%, 16% and 100%. 4% will allow the least
amount  of  pitch  manipulation  and  100%  will
allow the most amount of pitch manipulation. To
adjust  to  the  different  values  please  see  page
28.  The  L.E.D.  of  the

PITCH ON/OFF BUTTON

will indicate which pitch percentage mode you
are in, glowing red for 4%, glowing red for 8%,
glowing blue for 16% or flashing blue for 100%.
Note when L.E.D. is not glowing in any color the
Pitch Function is not activated.

17. TAP BUTTON -

This button is used to override

and manually set a tracks BPM. Occasionally the
built-in BPM meter may not function as desired.
This  button  allows  you  to  override  the  internal
beat clock and manually set a tracks BPMs. To
manually  set  the  BPMs;  tap  this  button  a  few
times to a tracks heavy down beat, the unit will
automatically  calculate  your  tapping  and  trans-
late it into a tracks BPMs. The BPM READOUT
is then displayed in the LCD (2). To return to the
automatic  BPM  counter,  press  and  hold  down
the

TAP BUTTON

for at least 2 seconds and then

release.

18. BOP BUTTON -

During play mode, pressing

the BOP button will instantly return play to the
last set cue point without interruption of music.

19. RELOOP BUTTON -

If a SEAMLESS LOOP

has been made (see setting a SEAMLESS LOOP
on page 17), but the CD Player is not actively in
SEAMLESS LOOP mode (a loop is not playing),
pressing  the  RELOOP  BUTTON  will  instantly
reactivate  the  SEAMLESS  LOOP  mode.  To  exit
loop,  press  the

OUT BUTTON (20).

LOOP and

RELOOP will appear in the

LCD DISPLAY (2)

when the RELOOP function is available.

20. OUT BUTTON -

This button is used to set

the ending point of a loop. A loop is started by
pressing the

IN BUTTON (21),

pressing the

OUT

BUTTON set the loop ending point. The loop
will continue to play until the OUT BUTTON is
pressed once again.

21. IN BUTTON -

“CUE ON THE FLY” - This

GENERAL FUNCTIONS AND CONTROLS (Cont.)

function allows you to set a CUE POINT (see CUE
POINT page 18) without music interruption (“on
the fly”). This button also sets the starting point
of a seamless loop (see SEAMLESS LOOP).

22. PLAY/PAUSE BUTTON -

Each press of the

PLAY/PAUSE BUTTON causes the operation to
change from play to pause or from pause to play.
While in play mode the blue play L.E.D. will glow,
and while in pause mode the blue play L.E.D. will
flash.

23. CUE -

Pressing the

CUE

button during play-

back  immediately  pauses  playback  and  returns
the track to the last set cue point (see setting a
CUE POINT, page 16). The green CUE L.E.D. will
glow when the unit is in cue mode The L.E.D. will
also  flash  every  time  a  new  CUE  POINT  is  set.
The  CUE  button  can  be  held  down  to  momen-
tarily  play  the  CD.  When  you  release  the  CUE
button it instantly returns to the CUE POINT. You
can  also  tap  the  CUE  button  to  create  a  BOP
EFFECT (for definition of BOP EFFECT, see page
24).

B. REMOTE CONTROL - REAR

24. CHANNEL 1 REMOTE JACK -

Connect the

supplied 8 pin din cable from this jack to the
player's channel 1 remote connector. This will
allow you to control the functions of player 1.

25. CHANNEL 1 CONTROLLER JACK -

Connect

the supplied mini-plug from the CUE jack on the
rear of your CD unit to the CONTROL out jack of
a compatible American Audio

or American DJ

mixer. This will enable the CD "Q-Start" function.
This feature is only available on American Audio

or American DJ

“Q” series mixers.

26. CHANNEL 2 REMOTE JACK -