GENERAL SAFETY INFORMATION
these instructions are for your protection and convenience. Please read them carefully since failure to follow
these precautions could result in injury or even death.
• always use the Vaf-3000P in accordance with the required operation standards listed below.
• Never put the Vaf-3000P into standing water or allow water inside the motor.
• Never store the Vaf-3000P outdoors.
• Never allow the air intake screens to become plugged.
• Never put any object in the intake screen unless the unit is disconnected from the air supply line and the fan
blade has stopped turning
• Do not allow the unit to be used as a toy. close attention is necessary when used by or near children.
• Keep hair, loose clothing, fingers, and all parts of the body away from the intake screen. if the fan is not
working properly because it has been dropped, damaged, left outdoors, or submerged in water, contact an
authorized Service center or the factory at (847) 364-4646.
for all aPPlicatioNS
1) 100 psi maximum.
2) Clean, dry, lubricated air supply required.
for hazarDouS locatioNS
1) CAUTION: Ground unit at lug on coupler plate.
2) Air supply lines shall be made of electrically
conductive material in accordance with the
recommended practice on static electricity, NFPA
77, and/or any other applicable local code.
INSTRUCTIONS FOR OPERATION AND CARE
oPeratioN StaNDarDS
• your new Vaf-3000P comes to you completely assembled and ready to operate. carefully inspect unit for
any possible damage from transit.
• When using the Vaf-3000P, note the directional airflow indicator on the external shell. this is the way the
air moves.
• Prior to connecting the Vaf-3000P to the air supply line, inspect the inlet and outlet screen and remove any
debris that may restrict airflow movement.
WheN uSeD With DuctiNG
1) Do not install duct when fan is in operation.
SPecificatioNS
Pneumatic Motor:
1.71 hp
RPM:
3000
CFM:
2063
DiMeNSioNS
Height:
21''
53.34 cm
Width:
14''
35.65 cm
Length:
17''
43.18 cm
Duct Adapter:
12''
30.48 cm
Weight:
28 lbs.
12.75 Kgs.
for hazarDouS locatioNS
2) Use only “Static Conductive Hose” properly
grounded. If connecting duct to duct use only
“Static Conductive” couplers made of aluminum.
3) Place duct lip over duct adapter and secure firmly.
4) Note the direction of airflow as indicated by the
arrow on the side of the fan.
3
Содержание VAF-3000P
Страница 6: ...VAF 3000P PICTORIAL BREAKDOWN 4 ...
