Americ Corporation VAF-1500, Руководство пользователя

Страница: 6 / 8

MAINTENANCE
DANGER
ALWAYS SHUT OFF THE FAN AND UNPLUG
IT FROM ITS POWER SOURCE TO PREVENT
ACCIDENTAL STARTING AND THE
POSSIBILITY OF ELECTRICAL SHOCK
AND/OR ELECTROCUTION. BE SURE THE
FAN BLADE HAS STOPPED ROTATING
BEFORE PLACING ANY OBJECTS OR
FINGERS NEAR THE FAN GRILL.
1. Visually check all fastners and individual
components for loose or broken parts. Tighten or
replace items, as required, only with genuine, factory
approved replacement parts.
2. Keep the Fan blade clean from debris.
Accumulation of dust, dirt, paint, etc. on the Fan
blade will throw the blade rotation out of balance
resulting in damage. To clean the Fan blade, be sure
the plug is disconnected and the blade has stopped
rotating. Remove one grill and wipe blade and interior
shell housing clean of debris with a damp cloth and
mild liquid soap. Dry all parts thoroughly.
DO NOT
PRESSURE WASH THE FAN.
Replace grill prior
to next operation.
DANGER
DO NOT OPERATE THE FAN WITHOUT THE
INLET AND OUTLET GRILL PROPERLY IN
PLACE.
3. Contact an Americ Authorized Service Center, or
Americ directly for Fan maintenance or repair not
described in this manual (or if you are unsure whether
maintenance is required.) at Tel# (847) 364-4646, or
at www.americ.com.
SERVICE
1) Refer to the TROUBLESHOOTING GUIDE in
this Manual.
MOTOR SPECIFICATIONS
A B
Voltage 110V AC~ 230V AC~
Frequency 50/60 Hz 50Hz
Phase Single Single
Electric Motor 1 HP 1 HP (.75kw)
Current (amps) 6/7.1 4.2
R.P.M 3425 2850
Watts 615W@110V 670W@230V
Free Air (cfm) 2091 2000 (57m3)
Max S.P. 3'' 2.5'' (68mm/aq)
GENERAL INFORMATION & DIMENSIONS
Type Axial
Duct adapter 12'' dia. (30 cm)
Height 21'' (53.34 cm)
Width 14'' (35.65 cm)
Length 17'' (43.18 cm)
Weight 32.5 lbs (14.74 kg)
AIR FLOW RATES
(110V AC) (230V AC)
Feet Description CFM M 3 /Min. CFM M 3 /Min.
Free Air 2091 59 2000 56.6
15' duct Straight 1756 50 1700 48.1
15' duct 1-90º bend 1637 46 1400 39.6
25' duct Straight 1734 49 1650 46.7
25' duct 1-90º bend 1550 44 1250 35.4
25' duct 2-90º bends 1498 42 1245 35.2
100' duct Straight 1361 39 1125 31.8
Flow rates were third party tested in a chamber built in
accordance with AMCA STD. 210-85. The published
flow rates are intended to serve only as a reference.
Manufacturing tolerances, duct type, and specific operat-
ing parameters will affect the overall flow rates(s) for
each particular Fan.
CAUTION
THE AIR FLOW RATE DECREASES AS THE
LENGTH OF DUCT INCREASES FOR BOTH
BLOWING AND SUCTION APPLICATIONS. AIR
FLOW RATES WILL VARY WITH SPECIFIC DUCT
TYPES AND MANUFACTURES.