41
Test:
This button causes the system to automatically send out an email to test the connection is OK or not. Prior to
the email test, please save the email setup information.
To reset to default settings, click the
Reset Defaults
button. To refresh the page, click the
Refresh
button. To save
the settings, click the
Save
button.
UPnP
UPnP stands for Universal Plug and Play, and it is a protocol used to easily connect devices to the internet. In the
case of this camera, it allows the camera to connect to the router in an easy manner to quickly allow for remote
access. Below is a screenshot of the UPnP settings screen:
Below is an explanation of fields on the UPnP settings screen:
Enable
: This checkbox allows the user to enable the UPnP function.
Mode: This dropdown menu allows the user to select a Customized UPnP mode or reset to default settings.
Router Status
: This field shows the UPnP status and has two options:
Mapping Failed
: This means that UPnP mapping has failed.
Mapping
Successful
: This means that UPnP mapping has succeeded.
Port Mapping List
: This table is used to show how the ports for each protocol listed below have been remapped by
the UPnP protocol.
first column shows the checkboxes to enable the corresponding service on the table.
The second column shows the name of the services. To edit this, double click on the service line item.
The third column shows the name of the protocol used by that service. To edit this, click the pencil button
in the modify column for that line item.
The fourth column shows the Internal Port used by that service to establish communication from the
router to the camera. To edit this, click the pencil button in the modify column for that line item.
The fifth column shows the External Port used by that service to establish communication from the router
to the internet. To edit this, click the pencil button in the modify column for that line item.
The sixth column shows the status of the protocol. If the protocol was mapped successfully, this field will
say “Mapping Succeeded”.
The seventh column allows the user to open a dialog box and edit the service’s information.
To reset to default settings, click the
Reset Defaults
button. To refresh the page, click the
Refresh
button. To save
the settings, click the
Save
button.
