AMCI SD17060E-K, Руководство пользователя

Страница: 10 / 110

SD17060E-K & SD31045E-K S
PECIFICATIONS
Networked Indexer/Driver User Manual
ADVANCED MICRO CONTROLS INC.
10
Networked Stepper Indexer/Drivers (continued)
The output motor current is fully programmable on these Networked Drivers. The SD17060E-K Drivers can
be programmed from 1.0 Arms to 6.0 Arms, while the SD31045E-K Drivers can be programmed from 1.0
Arms to 4.4 Arms. It is even possible to change the motor current setting while the move is in progress. These
ranges of output currents makes the Networked Drivers compatible with the complete line of stepper motors
from AMCI.
In addition to the Motor Current setting, the Motor Steps per Turn, Idle Current Reduction, and Anti-Reso-
nance Circuit features are also fully programmable. If you have used other stepper indexer products from
AMCI you will find the programming to be very similar to these products.
All Networked Drivers from AMCI are true RMS motor current control drivers. This means that you will
always receive the motor’s rated torque regardless of the
Motor_Resolution setting. (Drivers that control the
peak current to the motor experience a 30% decrease in motor torque when microstepping a motor.) The Net-
worked Drivers automatically switch from RMS to peak current control when the motor is idle to prevent
overheating the motor.
In addition to power and motor hookups, the Networked Drivers have three DC inputs and one DC output that
are used by the indexer. Configuration data from the host sets the function of these points. The output can be
configured to be a Fault Output or a general purpose output. Each input can be individually configured as a:

CW or CCW Limit Switch

Home Limit Switch

Capture Encoder Position Input

Stop Jog or Registration Move Input

Start Indexer Move

Emergency Stop Input

A/B Encoder Inputs

General Purpose Input
Conformance Markings
The Networked Driver devices meet the requirements for the following conformance markings when
installed and operated in accordance with the instructions contained in their product documentation.
UL
Listed component in the USA and Canada. UL file number is E231137.

US: UL 61800-5-1 Standard For Safety For Adjustable Speed Electrical Power Drive Systems - Part

5-1: Safety Requirements - Electrical, Thermal and Energy

Canada: CSA C22.2 No. 274 - Adjustable Speed Drives
CE

Directive 2014/30/EU of the European Parliament and of the Council (EMC), of 26 February 2014 on
the harmonisation of the laws of the Member States relating to electromagnetic compatibility; per EN
61800-3:2004/A1:2012.

Directive 2014/35/EU of the European Parliament and of the Council (Low Voltage), of 26 February
2014 on the harmonisation of the laws of the Member States relating to the making available on the
market of electrical equipment designed for use within certain voltage limits; per EN 61010-1:2010.
RoHS
Directive (EU) 2015/863 (RoHS 3) and Directive 2011/65/EU (RoHS 2)