Ambit U10C017, Руководство пользователя

Страница: 34 / 51

User’ Guide
34
7. Telnet commands
The Cable modem default telnet Login and Password:
Login: admin
Password: admin
** Note: Cable Modem local Telnet access is 192.168.100.1
Cable Modem remote Telnet access is Cable-RF-IP-address
Getting Help
Entering a question mark ( ? ) at the system prompt displays a list of commands for each command mode.
To list keywords or arguments, enter a question mark ( ? ) in place of a keyword or argument. Include a
space before the ? . This form of help is called command syntax help, because it reminds you which
keywords or arguments are applicable based on the command, keywords, and arguments you already
have entered.
CM>?
$EMTA
Change to EMTA Command Group
outputLF Output Log Flash to TFTP Server
passwd Change password
copy Copy command
ping Ping specified IP address
tracert Trace route
exec-timeout Configure login timeout
banner Banner-text
write Write configuration to nvram
reset Resetting system
default Set all settings of system to factory default
quit Disconnect
To list keywords or arguments, enter a question mark ( ? ) in place of a keyword or argument. Include a
space before the “ ?” . This form of help is called command syntax help, because it reminds you which
keywords or arguments are applicable based on the command, keywords, and arguments you already
have entered.
Redisplaying a command
To redisplay a command you previously entered, press the up-arrow key. You can continue to press the
up-arrow key for more commands.