Version 1.3
©Copyright 2016, Ambient LLC. All Rights Reserved.
Page 12
Command
Mode
Settings
[-/MEM]
Displays Outdoor Maximum
Temperature and the associated
date and time.
Press and hold [-/MEM] for two seconds to reset
the maximum outdoor temperature to the
current value.
[-/MEM]
Displays Outdoor Minimum
Temperature and the associated
date and time.
Press and hold [-/MEM] for two seconds to reset
the minimum outdoor temperature to the current
value.
[-/MEM]
Displays Indoor Maximum
Temperature and the associated
date and time.
Press and hold [-/MEM] for two seconds to reset
the maximum indoor temperature to the current
value.
[-/MEM]
Displays Indoor Minimum
Temperature and the associated
date and time.
Press and hold [-/MEM] for two seconds to reset
the minimum indoor temperature to the current
value.
[-/MEM]
Displays Maximum Barometer and
the associated date and time.
Press and hold [-/MEM] for two seconds to reset
the maximum barometer to the current value.
[-/MEM]
Displays Minimum Barometer and
the associated date and time.
Press and hold [-/MEM] for two seconds to reset
the minimum barometer to the current value.
[-/MEM]
Exit memory mode.
Figure 9
5.7
Viewing Historical Data (History Mode)
In the normal time mode, press the
HISTORY
button to display one hour increments of the last 72
hours of historical data, including indoor temperature, outdoor temperature, and barometric pressure.
If no button is pressed for 5 seconds, the display will return to the normal time mode.
5.8
Color Changing Feature
This display has two color models for the LCD backlight based on the
MANUAL/TEMP COLOR
slide switch in the battery compartment:
Manual
based on your personal preference
Temp Color
, based on outdoor temperature.
5.8.1
Manual Color Preference
1.
Place the
MANUAL/TEMP COLOR
slide switch in the manual position.
2.
Press the
LOOP ON / OFF
button, and the display will cycle through all of the possible
colors. Once the preferred color is displayed, press the
LOOP ON / OFF
button again to stop
the color cycling.
5.8.2
Outdoor Temperature Color
Place the
MANUAL/TEMP COLOR
slide switch in the temp position. The display color will
automatically change based on the color chart below:
#
Temperature Range (°F)
Color
1
< 0
White
2
0 - 10
Violet
3
10-20
Dark Blue
4
20-30
Light Blue
5
30-40
Dark Aqua
6
40-50
Light Aqua
