Version 1.0
©Copyright 2018, Ambient LLC. All Rights Reserved.
Page 4
Figure 3
Note:
The measurement accuracy of the sensor can be affected by the soil condition. For example, loose soil
may measure a lower moisture level than dense soil.
3. Synchronizing with your Display Console
Refer to the User Manual for your display console to locate specific buttons. After installing the
batteries in the wireless thermometer, place the sensor about 10 feet from the display console, and
press the
SENSOR
button on the console to manually receive the sensor signal.
The signal icon will flash until the reception is successful. If no signal is received within 5 minutes,
the icon will disappear.
NOTES:
If the signal for Channel 1-7 is lost and does not recover for 15 minutes, the temperature may display
“Er” for the corresponding channel, depending on the model of your console.
If the signal does not recover for 48 hours, the “Er” display will display all of the time (depending on
the model of your console). Replace the sensor batteries and press the
SENSOR
button on the console
to pair again.
