Version 1.6
©Copyright 2019, Ambient LLC. All Rights Reserved.
Page 4
1.
You must clean the rain gauge every few months and change the batteries every 2-3 years.
Provide easy access to the weather station.
2.
Avoid radiant heat transfer from buildings and structures. In general, install the sensor array at
least 5’ from any building, structure, ground, or roof top.
3.
Avoid wind and rain obstructions. The rule of thumb is to install the sensor array at least four
times the distance of the height of the tallest obstruction. For example, if the building is 20’
tall and the mounting pole is 6’ tall, install the sensor array 4 x (20 – 6)’ = 56’ away.
4.
Mount the sensor array in direct sunlight for accurate temperature readings.
5.
Installing the weather station over sprinkler systems or other unnatural vegetation may
affect temperature and humidity readings. We suggest mounting the sensor array over natural
vegetation.
6.
Wireless Range. Radio communication between receiver and transmitter in an open field can
reach a distance of up to 330 feet, providing there are no interfering obstacles such as
buildings, trees, vehicles and high voltage lines. Wireless signals will not penetrate metal
buildings. Under most conditions, the maximum wireless range is 100’.
7.
Radio Interference. Computers, radios, televisions and other sources can interfere with radio
communications between the sensor array and console. Please take this into consideration
when choosing console or mounting locations. Make sure your display console is at least five
feet away from any electronic device to avoid interference.
8.
Visit Ambient Weather Mounting Solutions for assistance and ideas for mounting your
weather station:
http://www.ambientweather.com/amwemoso.html
5.
Getting Started
The Ambient Weather WS-2902A OSPREY WiFi Personal Weather Station consists of an indoor
display console (re WiFi transmitter) and an all-in-one outdoor weather sensor array.
5.1
Parts List
QTY
Item
1
Display Console
Frame Dimensions (LxWxH): 7.50 x 4.50 x 0.75”
LCD Dimensions (LxW): 3.00 x 6.75”
1
Vertical Desk Stand
1
Sensor Array
1
Wind Vane
1
5V DC Adaptor
2
Pole mounting U-bolts
2
Pole mounting U-bolt nuts
1
User manual
5.2
Recommend Tools
•
Precision screwdriver (for small Phillips screw on wind vane and wind cups)
•
Adjustable wrench (for mounting pole)
•
Compass or GPS (for wind direction calibration)
