35
Installation
18.1 Log Set
WARNING
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this appliance
may result in property damage or personal injury.
The Ambiance pan burner bed and fiber logs are designed to give a realistic fire package, and created to look the same as the day
they were originally installed. Care must be given when first installing the logs, and if removed for servicing, as they can be damaged or
broken if not handled properly.
After opening the log set package, inspect the logs to ensure that no damage has occurred inside the package. Please report any
damage immediately to your Authorized Ambiance Dealer.
Gas and vent connection must be made before installing the embers and logs on the pan burner.
CAUTION:
DO NOT block pilot opening with embers or glass media material.
NOTE:
See
Figure 18.1.14
for log designations. Improper placement of logs and embers may cause soot accumulation on the internal
parts and glass. This is not covered under warranty. Do not use broken or damaged logs.
18.0 Media Installation
Step 1:
Align the holes of log 1 with the two locater pins at the
back of the burner. Set the log onto the pins with gentle force.
Step 2:
Place log 2 on the lower left front of the burner. Align the
hole in the bottom of the log and set the log into place
Figure 18.1.01:
Figure 18.1.02:
Figure 18.1.03:
Locator Pins
Log 1
Log 2
Содержание Inspiration 29
Страница 66: ...NOTES...
Страница 68: ......